Installation Manual

Integrated Remote Internet Control And Database Access


Cetan Nagin - Shadow Hawk
Remote Signals and Communications
Intelligence System
(c)Copyright 2006-2010 Cetan Nagin

www.cetannagin.com






Welcome to the Cetan Nagin - Shadow Hawk Remote Signals and Communications Intelligence System  Integrated Remote Internet Appliance Remote Control Access Manual

The Integrated Remote Internet Appliance Remote Control Access is contained in all versions of the Cetan Nagin - Shadow Hawk Remote Signals and Communications Intelligence System.  The remote Cetan Nagin Remote Radio Receiver Control Program is directly accessible over the world wide web
  • via a Mozilla based internet browser (FireFox, Safari, Opera, etc) or
  • operating two Remote Radio Receiver Control Programs in synchronous mode
The Cetan Nagin - Shadow Hawk Remote Signals and Communications Intelligence System
 Demonstration / Internet Down loadable version 2.xx does not contain the integrated remote  appliance  internet audio interface.  Version 3.xx contains the integrated remote appliance internet audio interface .  Cetan Nagin - Shadow Hawk version 3.xx is only obtainable via DVD  because of Version 3.xx excessive data example file sizes .  Version 3.xx contain significantly more examples, data files, and support and analysis software.

Version 2.xxx
  • The remote control access to  the Remote Radio Control Program restricted by simple id/password protection.
  • Open Source software is used to provide the remote appliance audio monitoring.  The remote appliance audio link is VoIP sip based.  Any VoIP soft phone can listen to the remote receiver audio.

Version 3.xxx
  1. The remote control access to the Remote Radio Control Program is encrypted with a choice of encryption algorithms.
  2. The remote audio can be monitored via VoIP sip/rtp soft phone with the audio encrypted using a choice of encryption algorithms.

Installing Remote Internet Access Interfaces


Installing DynDNS Dynamic DNS Client

Dynamic DNS providers provide a software client program that automates the discovery and registration of client's dynamic or static IP address. The client program is executed on a computer or device in the private network with a dynamic or fixed Ip address. The IP address is a 4 three digit numbers (xxx.xxx.xxx.xxx) separated by .(periods).  It is more operationally advantages to have a alphanumeric name than a number associated with a particular Remote Radio Receiver. It connects to the service provider's systems and causes those systems to link the discovered Remote Radio Receiver's IP address with a hostname in the domain name system. Depending on the provider, the hostname is registered within a domain owned by the provider or the customer's own domain name.

Click here to goto .the Dynamic DNS Client installation web page.




Installing Remote SIP Access Interfaces



Installing Sip-Audio-Feeding-Agent  Client

A free and open source Sip Audio Feeding Agent is an easy to use tool to capture the line input audio stream from sound card, and send the audio stream (u-Law) to clients using RTP/SIP. 

Click here to goto .the Linphone - SIP Compliant VoIP Telephone installation web page.



Installing Linphone - SIP Compliant VoIP Soft Phone

Linphone is a freeware soft SIP complaint VoIP soft phone used to listen to Cetan Nagin's remote radio receivers. 

Linphone uses a SIP address to identify the destination or IP address of the remote radio receiver control computer. A SIP address is something that is similar to a email address, for example sip:alice@example.net. The domain name (example.net) can also be accessed directly using its IP address (i.e. 76.123.54.34). To listen to a remoter radio receiver connected to the internet, just type the remote radio receiver's control computer SIP address in the sip address bar, then click "Start Call". You should then hear a remote ring, and once the remote radio receiver you are calling has answered the call; you, will hear the audio stream from the remote radio receiver.

Click here to goto .the Linphone - SIP Complaint VoIP soft phone installation web page.

Remote iPhone / iPod Touch Internet Access
Installing iPhone, iPod Touch, or iPad Remote Access

iCam allows you to stream live video and audio from up to four Cetan Nagin  Remote Receiver web sites to your iPhone, iPad, or iPod touch over WiFi, 3G, or EDGE. iCam is a $4.99 application for the iPhone / iPod Touch available at the apple itunes store .

The installation process is significantly easier if iCam™ software is installed before installing the iCamSource software.  The remote iPhone, iPad, or iPod Touch software can be installed on ether the computer hosting the Cetan Nagin Remote Radio Control Program or a  second computer accessing the XAMPP web server installed the computer hosting the Cetan Nagin Remote Radio Control Program.



Installing  iCamSource

iCamSouce allows you to stream live video and audio from up to four Cetan Nagin  Remote Receiver web sites to your iPhone, iPad, or iPod touch over WiFi, 3G, or EDGE. iCam is a $4.99 application for the iPhone / iPod Touch available at the apple itunes store - Click here to go to the apple itunes web page to purchase iCam.

You will need to install iCamSource on the computer hosting the Cetan Nagin Remote Radio Control Program or a remote computer monitoring the computer hosting the Cetan Nagin Remote Radio Control Program.
Click here to goto .the iCamSource installation web page.





Installing VCam™ (e2eSoft)

VCam™ is a virtual software camera, which simulates a webcam in your system and works just like a real webcam. Cetan Nagin uses VCam™ to frame a html web page specificly designed for viewing  on the iPad, iPhone, or iPod Touch.  The VCam™  program can be used on the computer hosting the Cetan Nagin Remote Radio Control Program is running on or a remote computer monitoring the computer hosting the Cetan Nagin Remote Radio Control Program.
Click here to goto .the VCam™ installation web page.






Initializing iCamSouce and VCam™ (e2eSoft)

VCam™ is a virtual software camera, which simulates a webcam in your system and works just like a real webcam. Cetan Nagin uses VCam™ to frame a html web page specificly designed for viewing  on the iPad, iPhone, or iPod Touch.  The VCam™  program can be used on the computer hosting the Cetan Nagin Remote Radio Control Program is running on or a remote computer monitoring the computer hosting the Cetan Nagin Remote Radio Control Program.
Click here to goto .the VCam™ installation web page.