Cetan Nagin Installation Manual

Initializing iCamSouceTM

and VCamTM


Cetan Nagin - Shadow Hawk
Remote Signals and Communications
Intelligence System
(c)Copyright 2006-2009 Cetan Nagin

www.cetannagin.com





Installing iCamSouceTM and VCamTM

VCam™ is a virtual software camera, which simulates a webcam in your system and works just like a real webcam. Cetan Nagin uses VCam™ to frame a html web page ("http://127.0.0.1/CellPhone.php") specificly designed for viewing  on the iPad, iPhone, or iPod Touch.  The remote iPhone, iPad, or iPod Touch software can be installed on ether the computer hosting the Cetan Nagin Remote Radio Control Program or a  second computer accessing the XAMPP web server installed the computer hosting the Cetan Nagin Remote Radio Control Program.



Start VCamTM

VCam Manager


You may have the firewall turned on.  If so click "OK" to allow the executable  program past the firewall.

VCam Haggle


You may have the firewall turned on.  If so click "OK" to allow the executable  program past the firewall.

Set VCam Coding


You may have the firewall turned on.  If so click "OK" to allow the executable  program past the firewall.

Set Screen Capture Charactoristics


You may have the firewall turned on.  If so click "OK" to allow the executable  program past the firewall.

Set Video Frame Rate



You may have the firewall turned on.  If so click "OK" to allow the executable  program past the firewall.

Hide Mouse On Remote Viewer


You may have the firewall turned on.  If so click "OK" to allow the executable  program past the firewall.

Load VCam Screen Parameters


You may have the firewall turned on.  If so click "OK" to allow the executable  program past the firewall.

Close VCam Screen Parameters Window


You may have the firewall turned on.  If so click "OK" to allow the executable  program past the firewall.

Open VCam Source Menu


You may have the firewall turned on.  If so click "OK" to allow the executable  program past the firewall.

Select Screen Capture


You may have the firewall turned on.  If so click "OK" to allow the executable  program past the firewall.

Select Capturing Specific Screen Area


You may have the firewall turned on.  If so click "OK" to allow the executable  program past the firewall.

Start Screen Capture


You may have the firewall turned on.  If so click "OK" to allow the executable  program past the firewall.

Sreen Capture Area


You may have the firewall turned on.  If so click "OK" to allow the executable  program past the firewall.

Start iCamSource


You may have the firewall turned on.  If so click "OK" to allow the executable  program past the firewall.

Right Click iCamSouce Icon In Bottom Right Toolbar



You may have the firewall turned on.  If so click "OK" to allow the executable  program past the firewall.

Stop iCamSource Program


You may have the firewall turned on.  If so click "OK" to allow the executable  program past the firewall.

Stop iCamSource Preferences


You may have the firewall turned on.  If so click "OK" to allow the executable  program past the firewall.

Select Video Source


You may have the firewall turned on.  If so click "OK" to allow the executable  program past the firewall.

Select Audo Source


You may have the firewall turned on.  If so click "OK" to allow the executable  program past the firewall.

Login ID


You may have the firewall turned on.  If so click "OK" to allow the executable  program past the firewall.

Login Password


You may have the firewall turned on.  If so click "OK" to allow the executable  program past the firewall.

iCamSource Auto Start


You may have the firewall turned on.  If so click "OK" to allow the executable  program past the firewall.

Load iCamSource Preferences


You may have the firewall turned on.  If so click "OK" to allow the executable  program past the firewall.

Start Dynamic DNS Client Program


  1. Click on the desired Host Name you would like to use for the local webserver's address.
  2. Click on "Start Updater" to start  the DynDNS client program. 
  3. Click on "OK" button to close the window.

Start Dynamic DNS Client Program


  1. Click on the desired Host Name you would like to use for the local webserver's address.
  2. Click on "Start Updater" to start  the DynDNS client program. 
  3. Click on "OK" button to close the window.

Start Dynamic DNS Client Program


  1. Click on the desired Host Name you would like to use for the local webserver's address.
  2. Click on "Start Updater" to start  the DynDNS client program. 
  3. Click on "OK" button to close the window.

Disable Junk Mail


"MAKE SURE YOU DO NOT CLICK ON  "Enable DynDNS Internet Guide  on the PC".  Click on "Next" button to start installation of the DynDNS client program.

Dynamic DNS Client Folder



Click on "Next" button after selecting the location to store the DynDNS client program on the computer's  hard drive.  Suggest using default folder location to store the DynDNS program.

Installing Dynamic DNS Client


Coffee time.

Installing Dynamic DNS Client


Coffee time.

Dynamic DNS Client Installation Completed


Click on "Finish" button to complete the DynDNS client program installation..

Start Dynamic DNS Client Program


Enter your Usermane and Password you selected when creating your DynDNS account. Click on "Okay" button to start the DynDNS client program.