Cetan Nagin Installation Manual

iCam is an application for the iPad, iPhone and iPod touch that allows live video and audio streaming from up to four remote radio receiver's computer desktops at the same time. The iCamSource is the free computer application that streams the remote radio receiver's computer desktop's video and audio to iCam.

iCamSource streams audio and video from your desktop via VCam to an iPad, iPhone or iPod Touch. iCamSource is the server-side application that allows the iPad, iPhone, and iPod Touch app iCam to show user's video streamed from a Windows or Mac OS X computer. The server application is free, (but the iPhone app itself is $4.99 at the iPhone App store).

When you have installed the server application and the iPhone or iPod Touch app, you can start streaming video from your remote radio receiver's local control computer to the iPhone or iPod Touch. iCam supports up to remote radio receivers simultaneously. Besides streaming video to the iPhone directly, iCam can also record video when it detects motion on your cameras. You can tweak the sensitivity levels, to increase or decrease how much movement will trigger the streaming. The application can also be configured to warn you through your iPhone when it detects movement through push notifications, and it can additionally record the movement to your computer. The recordings do not quite imply video. In fact, iCamSource takes a series of snapshots when it senses movement and saves those images to your hard drive. You can then go through them to see what happened. iCamSource does not record audio, but you can hear everything on your iPhone.

Down load the ICcam Source (server) pc computer program from http://skjm.com/icam/support.php. The Icam Source (Server) pc program is free.

Click on the "Save File" to start the down loading of the Icam Source (Server) pc computer program.

Click on the "Next" button to start the dynamic DNS registration process.

1. Enter the desired host name *your desired internet address or domain name".
2. Select the desired dynamic DNS extension
   

1. Click on "Use auto detected IP address xx.xx.xxx.xx" to assign an ip address to the dynamic DNS address.  (This is only temporary - The ip address will be automatically updated when the dynamic DNS client is enabled on the host machine).
2. Do not click on TTL value to change the ip address update rate.  You will exceed the maximum allowable ip address updates for a year. The ip address will not update for the later hours in the day..

Check the following:
remote file access
remote desktop
web server

Enter a valid email address - you will be sent an email with a hyper link to click to confirm you are a real person.  icam uses this address to ration five dynamic
DNS addresses to a single person.

Fill in the anagram to verify your human and check the agree box below.  Click on "Create Account" button to start creating your dynamic DNS account.

Check to send the dynamic DNS verification to your email address.

Click on the hyper link to confirm and activate your dynamic DNS account.

icam shows your active dynamic DNS accounts at icam.com.

If you would like to add an additional dynamic DNS address click on "Add New Host name".

You now must install a dynamic DNS client on your computer hosting the Cetan Nagin -  Shadow Hawk Remote Signals and Communications System

Click on "Download Now" button to down load the icam client program.

Click on "I Agree" to continure loading the icam Client Program (who reads the agreements - may I have mine in  Swahili  please).

Click on "Next" button to continue the icam client program installation..

"MAKE SURE YOU DO NOT CLICK ON  "Enable icam Internet Guide  on the PC".  Click on "Next" button to start installation of the icam client program.

Click on "Next" button after selecting the location to store the icam client program on the computer's  hard drive.  Suggest using default folder location to store the icam program.

Coffee time.